Description
| Brand | Soundcore |
| Color | Black |
| Connectivity Technology | Wireless |
| Model Name | A3919011 |
| Form Factor | In Ear |
About this item
-
A VOLUME SOLVED!They sounded low when I first used them, but then I went into my phone settings and realized there is actually a setting to turn up the sound of the phone itself so your buds CAN get LOUD! The iPhone setting comes automatically midrange volume. I don’t know for Android though, but I’m guessing it’s the same. For iPhone:Open the Settings app.Tap “Sounds & Haptics”.Tap “headphones safety” and use slider to turn the volume all the way up or down.
-
A Not quite sure what’s going on there. Did you have the ear buds paired to another device? That’s usually the culprit most of the time. Just disconnect via the other device, then pair with your Fitbit. You may have to actually turn the other device off, return earbuds to the case too. Also, if you can check the blue tooth menu to see if the earbuds are listed, then select. Hope that helps.
-
A Check with Amazon. Go to your orders and find your item. Should be a button for returns listed next to the item.
-
A We kindly ask you to try the following troubleshooting as those have proven to oftentimes already help:1- Turn your Bluetooth device (such as a computer, phone, or tablet) on and off, clear all pairing records in your Bluetooth pairing history, and turn off the Bluetooth of the connected device.2- Fully charge your earbuds and reset the earbuds, as per the steps below: -Place the earbuds into the charging case and make sure they are being charged. -Press and hold the button on both earbuds in the case for 3 seconds. The LED indicators will flash red 3 times and then turn white.3- After the reset, take both earbuds out of the charging case to make sure they are successfully paired; you will see the white light flashes quickly on the one earbud, and the light flashes slowly on the other side, which means they pair together. Please wait for a few seconds to let the two earbuds pair together. This is a very important step.4- Turn on the Bluetooth of your device again and search for Soundcore Life P2 and pair. When there is a pop-up window for you to confirm pairing for "Soundcore life P2" and "Soundcore life P2-L", please select "pair" for both. If you select "cancel" accidentally, you need to delete the earbuds from the device's Bluetooth history and re-pair the earbuds.
-
A No, the music will continue playing. You can pause it by tapping on the button on the side of either earbuds, or placing the earbud back in the case (which powers it off).
-
A It comes with a USB cord to use but any USB with the same type of end will work. I use the same cord I already had to charge my phone. The case charges rapidly
-
A I specifically use this whenever I'm going to make a phone call. It picks up my voice while muting ambient sounds much better. To maximize this effect, face away from the source of any major noise. There are several microphones and it attempts to reduce any sound that is louder behind you than infront since it knows those sound waves must not be your voice.
-
A They are with 6mm Graphene Drivers.
-
A Sí, su bluetooth es compatible con IOS.
-
A It is with 5 sizes of eartips. For the vast majority of our customers, there is at least one perfectly suitable set included. The XL eartips are designed for small ears.
-
A I hold the right earbud logo button down about 2 seconds and it skips 30 seconds of audio podcast. Hold left down two seconds it skips back 30 seconds. Works well for me on podcasts have not tried an audiobook yet.
-
A When the charging case and earbuds are charging, the Power indicators are steady white. When it's fully charged, the indicators go off.
-
A Please try the following troubleshooting to see if it helps:- Try to turn up the volume on the connected devices.- Use a Q-tip with a bit of rubbing alcohol to gently clean the metal mesh filter under the rubber ear tips. This is best done when sound is playing through your earbuds at max volume.- Try to forget the pairing records (both Soundcore Life P2 and Soundcore Life P2 L) on your device and turn off the Bluetooth.Reset the earbuds via the steps below:Place the earbuds into the charging case and make sure they are being charged.Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.If the troubleshooting is not helpful, please contact after-sale support for warranty claims.
-
A I have never used my wired Apple headphones. The sound they produce seem to be great. When I use them for biking I do not here any wind or noise beside the music. The best part is that they are water proof and not wired.
-
A The case has 40 hours. You use 7 hours at a time before having to recharge to bus in the case and all. You can place them in the case for 10 minutes and get an hour charge for quick uses.
-
Q I put my ear buds in the charging case and no lights come on to let me know my ear buds are chargingA Please try the following troubleshooting steps:1. Make sure the charging case has enough power.2. Take the earbuds out of the case and see if a flashing white light comes on. If it doesn't, try manually pressing the button of earbuds to power them on.3. Try to use a terrycloth/cotton swab with a bit of alcohol to clean the contact pins both in the charging case and on earbuds to ensure a better connection.If the problem persists, please reach out to our customer support to claim the warranty.
-
A In response to Mel’s answer below, do the Comply tips fit in the case and allow it to close for charging? The Anker earbud’s ear tips take a standard size diameter, but the stock Anker silicone tips are very short in height and standard height foam tips won’t allow for charging without taking off the tip each time you need to charge and use the earbuds.Also, I got these earbuds on a sale refurbished, and I’ll be damned if I’m going to pay more for the Comply brand foam replacement tips than I paid for the headphones themselves. Anyone have a suggestion on a short memory foam tip that doesn’t cost $25 for $.12 worth of foam? Thanks
-
A Sí, ellas son compatibles con Motorola.
-
A I'm not sure you can use the ear buds to pair to the echo dot. The ear buds require you to input a pin # into the device that you are pairing, such as your mobile device? I would ask that question directly to Anker. They have a website, and would gladly answer that question with more/correct information than I could give you.
-
A Yes, these earbuds can pair with Samsung note 20 ultra.
-
A Yes, normally they should work if the phone in your pocket while riding your bike but to ensure a better Bluetooth connection we would suggest placing your phone in the right pocket as your right earbud is the master earbud and it passes the audio to the left one.
-
A Really sorry for the problem encountered.To fix this issue, please try the following troubleshooting as those have proven to be helpful;1) Reboot your Samsung A51 and forget all the pairing records and turn off the Bluetooth on your Samsung A51.2) Reset the earbuds via the steps below: *Place the earbuds into the charging case and make sure they are being charged. *Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.Please note that earbuds reset must be done holding earbud buttons for 3 seconds with earbuds placed in the case.3) After the reset, take both earbuds out of the charging case to make sure they are successfully paired; you will see the white light flashes quickly on the one earbud and the light flashes slowly on the other side, which means they pair together.4)Turn on the Bluetooth of your Samsung A51 and see if you can search for Soundcore Life P2 and pair.When there is a pop-up window for you to confirm pairing for "Soundcore life P2" and "Soundcore life P2-L", please both select "pair". If you select "cancel" accidentally, you need to delete the earbuds from the device's Bluetooth history and re-pair the earbuds.
-
A I think so since they all have a similar size
-
A It comes with a plug that fits the case and the other end is USB so you plug it into your computer or other USB jack.
-
A Yes, the Life P2 can work with Apple Watch 5.
-
A The first one you turn on and connect to your device becomes the master. They are labeled independently in your bluetooth menu -L for left. Once that first one is connected, when you pull out the second earbud from the case. I reeeeeallly tried to connect one earbud to two devices independently but they keep wanting to pair back to eachother.
-
A I commonly use with PC. Voice commands and communication work fine. Double check your device set up connections if you are having problems.
-
A It is bluetooth and will work with any bluetooth enabled device
-
A Please note you can press the right side twice for the next track and press the left earbud twice for the previous track.
-
A We do not test them, but if it supports the Bluetooth and can pair with other headphones, I believe these earbuds will work with it.
-
A Please make sure the left earbud was fully charged and try a different device again to see if the issue happens?If the step doesn't help, please reach out to us for further assistance. There are 3 easy ways to get ahold of us:1. Writing to the email address in your product's user manual. 2. Searching for our customer support online3. Reaching out through Amazon messenger We offer an 18-month warranty for this product, plus lifetime technical support. Our standard for responding to email quests is less than 24 hours, and we look forward to hearing from you!Best regards,AnkerDirect Customer Service Team
-
A No, they support passive noise cancellation.
-
A No, they do not support the app.
-
A I use 1 earbud while the other is in the case
-
A For the connection issue when outside, please try the following tips to see if that helps:1. Try reducing the distance between your right earbud and your audio device, like having your audio device in your right pocket or right side. Your right Soundcore Liberty earbud is the master (main) earbud. It connects to your audio device and to the left earbud.2. Reset your Bluetooth connection by turning off your device's Bluetooth for at least 10 seconds and then turn it back on. Please note, turning Bluetooth off and back on quickly will not reset the connection. 3. Close any unused apps on your phone to maintain enough memory.
-
A Yes, it will work with One Plus 7T.
-
A I had the Life P2 earbuds and was disappointed in the cost Vs performance comparisons. They were average for the price. I don't have the Liberty 2 earbuds myself. But according to reviews I've read and watched on Youtube, they have good reviews. I do own the Liberty 2 Pro earbuds and they are the best that I have ever owned. They are better than all the headphones I own too when it comes to music. I was leary about spending the extra money. But if these ever quit working, I'll gladly buy them again without hesitation. Calls are also crystal clear. People think I'm talking directly on my phone, not earbuds. The Libert 2 Pros are worth more than the money! Don't be afraid to put out the extra for them. If you have the extra money... go for Liberty 2 Pros!
-
A Yes, there are multiple ear pieces that you can use.
-
A Let's try if the following tips are helpful or not:1). Firstly try to forget the pairing record on your device2). Reset the earbuds.a. Place the earbuds into the charging case and make sure they are being charged.b. Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.3). After the reset, take both earbuds out of the charging case to make sure they are successfully paired; you will see the white light flashes quickly on the one earbud and the light flashes slowly on the other side, which means they pair together. When there is a pop-up window for you to confirm pairing. Select "pair". If you select "cancel" accidentally, you need to delete the earbuds from the device's Bluetooth history and re-pair the earbuds.
-
A I haven't been on a plane with them yet.
-
A 1). Firstly try to forget the pairing record on your device2). Reset the earbuds.a. Place the earbuds into the charging case and make sure they are being charged.b. Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.When there is a pop-up window for you to confirm pairing. Select "pair". If you select "cancel" accidentally, you need to delete the earbuds from the device's Bluetooth history and re-pair the earbuds.
-
A If you use both earbuds at a time, then you can only pair them to one device.If you use each earbud individually, then you can pair them to different devices at a time. Here are instructions for you:пј€1пј‰Manually turn both earbuds offпј›пј€2пј‰ Press and hold the button on both earbuds for 3 seconds when earbuds are turned off. Then the left and right earbuds can connect with different device.
-
A It depends on the shape of your ear and what kind of sound signature you want. I found the p2 was too loose in my ear, so I got the liberty neos. The neos have better sound isolation as well. However, p2 is better for calling. Like I said, it depends what you'll be using the earbuds for.
-
A Yes, it announces the caller name linked from your phone book
-
A We tested the galaxy note 10+ with this item and we concluded there might be compatibility issues. In order to avoid any misleading to customers, we added a note in the title.At present, our headset has been optimized, there is no compatibility problem anymore, so it can be used with galaxy note 10+ mobile phone. We'll remove the note from the title soon.
This fits your .
